Trip Wire Trip 12+

(International orders contact us directly at ncpdohio@gmail.com)

◉ The Trip Wire+ is a cable with attached sensors that react to EMF and change colors depending upon the strength of the source.

◉ The Trip Wire+ comes in two lengths. The Trip-12+ is 12 ft long with 10 evenly spaced sensors, and the Trip-36+ is 36 ft long with 12 evenly spaced sensors.

◉ 6 VIBRANT COLORS are emitted when sensing EMF. Pink, blue, green, yellow, orange and red colors light up to EMF fluctuations & spikes. The lights are highly visible from all directions (360⁰ illumination), unlike other EMF meters such as the K2 which have small LEDs that are barely visible to members in your group.

◉ INCORPORATES SOUND ON/OFF which is located at the power supply. When activated, a variable tone will be heard depending upon the number of sensors lighting up.

◉ EXTENDED TIME DELAY for the lights. In other words, when the color Red is activated, it will take approximately 4 seconds for the sensor to return back to the base Pink color as compared to approximately 2 seconds for the original Trip Wire.

◉ EASY OPERATION! Simply position the cable and turn the power on at the battery supply. The lights will briefly flash and settle down to the base color Pink. Ideal locations for the Trip-12+ would be stairways, doorways, and surrounding trigger objects. The Trip-36+ would be suitable for long hallways, aisleways, and stages where extra EMF coverage is needed.

◉ BROAD COVERAGE & FAST STAGING! The Trip-12+ and Trip-36+ are quick and easy to set up and relocate compared to handling 10 to 12 individual Ghost Meters. The cost savings is also substantial! One Trip Wire+ can replace many, individual, expensive EMF detectors which use 9-volt batteries.

◉ Includes a 3” carabiner used to loop the cable and conveniently secure to your belt loop or backpack.

◉ Includes an extra large, black, canvas pouch for storage.

Please Note: The Trip-12+ is handcrafted and custom-made per order. Because of this, NCPD LLC will not accept returns unless defective. Please contact us if you have any questions.

New for summer, 2025! NCPD LLC is very proud to announce the release of the versatile, mobile, EMF Trip Wire+! I’m Jeff Eastman, founder of NCPD LLC and inventor of the Trip Wire+, in addition to several other innovative ghost hunting devices.

As a mechanical engineer and paranormal investigator, I enjoy modifying, improving, and inventing ghost hunting equipment which I use on our paranormal investigations. All of my products are handmade with the utmost quality and care.

The Trip Wire+ is an updated version of my very popular Trip Wire. I incorporated an additional feature/option of sound which is controlled by a Sound On/Off button located on the power supply. Along with visually being amazed by the colorful, highly visible light sensors as they react to changing EMF strength, you will now be able to hear tones associated with those Trip Wire+ hits. With the addition of sound, you greatly improve your chances of witnessing amazing EMF evidence.

Use the Trip-12+ when a need for greater concentration of EMF sensors is desired such as going down a stairway, draping a door frame or encircling a trigger object.

Use the Trip-36+ when EMF coverage is desired for a larger/longer area such as a hospital hallway, in front of prison cell doors, or on a theater stage. For transportation, you can use the black canvas pouch or you can secure the Trip Wire+ to your belt loop using the 3” carabiner clip.

And, as always, have fun and be safe on your next paranormal investigation!